Class 10: Chemistry Chapter 13 solutions. Complete Class 10 Chemistry Chapter 13 Notes.
Contents
Selina Class 10 ICSE Solutions Chemistry : Chapter 13- Practical Work
Selina 10th Chemistry Chapter 13, Class 10 Chemistry Chapter 13 solutions
Exercise 1
Solution 1.
(a) (i) Chemical test for ammonia:
If a rod dipped in concentrated hydrochloric acid is brought near ammonia gas, dense white fumes of ammonium chloride (NH4Cl) are formed.
(ii) Chemical test for Sulphur dioxide:
It decolorizes pink coloured potassium permanganate solution.![]()
(iii) Chemical test for HCl:
When HCl gas is passed through AgNO3 solution, white precipitates of AgCl are formed which gets dissolved in excess of NH4OH.![]()
(iv) Chemical test for Chlorine:
It turns moist starch iodide paper (KI + starch solution) blue black.
(v) Chemical test for Carbon dioxide:
When this gas is passed through lime water, it turns milky due to the formation of white precipitates of CaCO3 and on passing excess of carbon dioxide gas, this milkiness disappears.
(vi) Chemical test for oxygen:
This gas is absorbed in colourless alkaline solution of pyrogallol and turns it dark brown.
(vii) Chemical test for hydrogen:
It burns with a pop sound when a burning taper is brought near it.
(b) Ammonia is a basic gas and its basic nature is suspected through litmus paper test because it changes the colour of red litmus paper to blue.
(c) Chlorine, carbon dioxide, hydrogen chloride, hydrogen sulphide and sulphur dioxide are acidic gases since they convert blue litmus to red.
(d) A is chlorine and B is Sulphur dioxide.
(e) Water vapour.
Solution 2.
(a) O2
(b) NH3
(c) Water vapour
(d) SO2
Solution 3.
(a) Na2CO3 and K2CO3
(b) SO2
(c) CO2
(d) Cl2
(e) H2S
Solution 4.
Silver nitrate and ammonium nitrate.
Solution 5.
(a) Cl–
(b) SO42-
(c) CO32-
(d) SO32-
Solution 6.
(a) Since the salt solution turned blue litmus red hence the salt may be an acid.
(b) Since addition of barium chloride into the solution of salt gave white precipitate so the salt may contain SO42-, SO32-, CO32– anion.
(c) The flame test of the salt gives persistent golden yellow colourisation which suggests presence of Na+ ion.
Solution 7.
(a) Ca2+
(b) Cu+
(c) The three ways are:
- Ammonia gas turns moist red litmus blue.
- If a rod dipped in concentrated HCl is brought near the gas, dense white fumes of NH4Cl are formed.
- The gas turns colourless Nessler’s reagent i.e. K2HgI4 brown.
Solution 8.
| Hydrogen sulphide | Ammonia | Sulphur dioxide | Hydrogen chloride | |
| Shake the gas with red litmus solution | No change in the colour of litmus solution | Red litmus solution becomes blue in colour. | No change in the colour of litmus solution | No change in the colour of litmus solution |
| Shake the gas with blue litmus solution | Blue litmus solution becomes red in colour. | No change in the colour of blue litmus solution. | Blue litmus solution becomes red in colour. | Blue litmus solution becomes red in colour |
| Apply a burning splint to a gas | No reaction. | No reaction. | No reaction. | No reaction. |
Solution 9.
(P) Ammonium chloride
(Q) Calcium
(R) Calcium hydroxide
(S) Lead (II) Nitrate
(T) Calcium Oxide
(U) Lead (II) Oxide
(V) Chlorine
(W) Hydrogen chloride
Solution 10.
| Carbonate | Colour of residue on cooling |
| Zinc Carbonate | white |
| Lead Carbonate | yellow |
| Copper Carbonate | black |
Solution 11.
(i) Sodium carbonate and sodium sulphite can be distinguished by using acidified K2Cr2O7:
Take a small quantity of salt in a test tube; add dil. H2SO4.and warm if necessary. Now if on bringing a filter paper moistened with acidified K2Cr2O7 near the gas evolved, the orange colour of the paper turns green then it is sodium sulphite.
(ii) Sodium thiosulphate and sodium sulphite:
The salts can be distinguished by using silver acetate. To the salt silver acetate and dil. HNO3 are added. If there is formation of a white precipitate which slowly turns black then it is thiosulphate anion since silver acetate forms Ag2S2O3 which being unstable in acid solution gets converted to black Ag2S.
(iii) Sodium hydroxide solution and ammonium hydroxide solution:
These salts can be distinguished by using a metal cation like calcium. When we add calcium salt to sodium hydroxide and ammonium hydroxide, then a white curdy ppt. is formed only in case of sodium hydroxide.
(iv) Ammonium sulphate and sodium sulphate:
These salts can be distinguished by using KOH. When KOH is added to ammonium sulphate, ammonia gas is evolved. Whereas there is no evolution of ammonia gas in case of sodium sulphate.
(v) Add barium chloride solution to sulphuric acid, nitric acid and hydrochloric acid. A white precipitate is formed in dilute sulphuric acid, and no such precipitate is formed in nitric acid and hydrochloric acid.
BaCl2(aq) + H2SO4(aq) → BaSO4(s) + 2HCl(aq)
Solution 12.
(a) Lead chloride as precipitate and sodium nitrite are formed.
(b)
| Zinc chloride | Zinc nitrate | Zinc sulphate | |
| Barium chloride | No reaction | No reaction | White ppt. is obtained |
| Lead nitrate | No reaction | No reaction | No reaction |
(c) Dilute sulphuric acid liberates carbon dioxide from metallic carbonates and bicarbonates. Carbon dioxide when bubbled into a test tube containing calcium hydroxide solution turns it milky.
Solution 1 (2004).
| Aqueous salt solution | Colour of the precipitate when NaOH is added in small quantity | Nature of the (soluble or insoluble) when NaOH is added in excess |
| copper (II) sulphatezinc nitratelead nitratecalcium chlorideiron (III) sulphate | (i) Pale blue(ii) White gelatinous(iii) White chalky(iv)White curdy(v) Reddish brown | (vi) Insoluble(viii) Soluble(viii) Soluble(ix) Insoluble(x) Insoluble |
Solution 1 (2005).
(I) Iron (II) Sulphate and Magnesium sulphate
(II) Iron (III) chloride and Zinc Chloride
(III) Lead nitrate
(IV) Copper nitrate.
(V) Lead nitrate.
Solution 1 (2006).
(a) When alkaline phenolphthalein solution is added to acids then the colourless solution remains colourless.
(b) Orange colour of methyl orange indicator turns pink when the indicator is added to acids.
(c) Neutral litmus solution turns red on addition to acids.
Solution 1 (2007).
| Salt | Anion |
| A | Cl– |
| B | S2- |
| C | NO3– |
| D | SO32- |
| E | CO32- |
Solution 1 (2008).
(a) Iron (II) sulphate
(b) (I) Ammonia (NH3)
(II) Dilute nitric acid (HNO3)
(III) H2S
(IV) Chlorine (Cl2)
(V) Ethanol
Download PDF
Selina Class 10 ICSE Solutions Chemistry : Chapter 13- Practical Work
Download PDF: Selina Class 10 ICSE Solutions Chemistry : Chapter 13- Practical Work PDF
Chapterwise Selina Publishers ICSE Solutions for Class 10 Chemistry :
- Chapter 1- Periodic Table, Periodic Properties and Variations of Properties
- Chapter 2- Chemical Bonding
- Chapter 3- Acids, Bases and Salts
- Chapter 4- Analytical Chemistry: Uses of Ammonium Hydroxide And Sodium Hydroxide
- Chapter 5- Mole Concept and Stoichiometry
- Chapter 6- Electrolysis
- Chapter 7- Metallurgy
- Chapter 8- Study of Compounds – Hydrogen Chloride
- Chapter 9- Study of Compounds – Study of Compounds – Ammonia
- Chapter 10- Study of Compounds – Nitric Acid
- Chapter 11- Sulphuric Acid
- Chapter 12- Organic Chemistry
- Chapter 13- Practical Work
About Selina Publishers ICSE
Selina Publishers has been serving the students since 1976 and is one of the quality ICSE school textbooks publication house. Mathematics and Science books for classes 6-10 form the core of our business, apart from certain English and Hindi literature as well as a few primary books. All these books are based upon the syllabus published by the Council for the I.C.S.E. Examinations, New Delhi.Our textbooks are composed by a panel of subject experts and vetted by teachers practicing in ICSE schools all over the country. Our continuous efforts in complying with the standards and ensuring lucidity and clarity in content, makes us stand tall in the industry.
