Alliance College Of Engineering And Design, Bangalore

 
Alliance College Of Engineering And Design, Bangalore
City Bangalore, Karnataka, India
Locality Chandapura - Anekal Main Road
Established 2010
Affiliated to Alliance University, Bangalore
Address Chikkahagade Cross, Chandapura - Anekal Main Road, Anekal
Bengaluru – 562106, Karnataka, India
Phone +91 80 4619 9000 / 9100 / 9200
Fax +91 80 46199099
Website Visit Website

Alliance College Of Engineering And Design, Bangalore was established in the year 2010, Alliance College Of Engineering And Design, Bangalore is affiliated to Alliance University, Bangalore

Admission Notices

    Alliance College of Engineering and Design offers degree courses aimed at building skill, expertise and knowledge among its graduates in the areas of higher technology and design.

    The College is committed to achieving excellence in technology development and its courses, under the various fields of engineering and technology aim at achieving in its graduates competent and motivated engineers and designers.

    The Alliance College of Engineering and Design has been built on a strong foundation of achieving technological development through a curriculum that places a high emphasis on the design aspects of engineering by developing design professionals who are passionate and creative problem-solvers, and who possess strong multi-disciplinary fundamentals that are combined with a keen sense of aesthetics. Real-world, industry-driven internships and project work; centers of excellence and incubation for cutting-edge research and development; and learning outcomes aligned with the criteria outlined by the Accreditation Board for Engineering and Technology (ABET), USA—the Alliance College of Engineering and Design provides unparalleled opportunities for graduates to pursue technological education with passion and confidence.

    The Alliance College of Engineering and Design currently offers seven, four-year, full-time Bachelor of Technology (B. Tech.) degree courses at the undergraduate level. The undergraduate courses at the Alliance College of Engineering and Design are unique offerings where graduates receive a Bachelor of Technology degree in their chosen discipline of engineering alongside minor specializations.

    Alliance College Of Engineering And Design, Bangalore offers various graduate courses as well as Post Graduate courses.

    PG Diploma / Certification Courses

    Post Graduate Diploma in Computer Aided Engineering (PGDCAE)

    Post Graduate Diploma in Computer Aided Engineering (PGDCAE)

    PGDCAE

    Admission to the Post Graduate Diploma in Computer Aided Engineering course at the Alliance University College of Engineering and Design is strictly based on merit.
    Eligibility
    • Any graduate
    • Secured an aggregate of 50% (General) 45% (SC, ST, CAT-1, IIA, IIB, IIIA and IIIB of Karnataka)
    Course Duration

    1 year Full-Time

    Application Form

    • Candidates are encouraged to download application forms

    Prospectus 2012

    Download Prospectus 2012

    Online Application

    Terms and Conditions

    Students are required to abide by the following terms and conditions upon admission to the courses offered by Alliance University College of Engineering and Design:

    • Every effort has been made to ensure the accuracy of the information contained in this Prospectus and it is issued on the express condition that all matters in it are subject to change from time to time without notice. While the Alliance University College of Engineering and Design will make all reasonable endeavors to deliver the courses of study and other educational services as set out in this Prospectus, circumstances may change prompting the Alliance University College of Engineering and Design to reserve the right to vary the content and delivery of courses and programs, to either discontinue or combine courses and programs, or to discontinue educational services.
    • The subject titles, descriptions and contents are subject to change based on the University guidelines.
    • The fee schedule for the courses offered by the Alliance University College of Engineering and Design is posted at www.ced.alliance.edu.in

      Fees payable for the courses offered by the Alliance University College of Engineering and Design are subject to review periodically. Ensuring that fees are paid before the announced due dates is the sole responsibility of the student. Non-payment of the prescribed fees within the due dates will result in the cancellation of the registration to the course or to the subsequent semester/year.

    • Policy regarding refund of course fees:
      • The course fee has two components - Registration Fee and Tuition Fee.
      • The Registration Fee, once paid, will not be refunded by the Alliance University, College of Engineering and Design under any circumstances. The objective of this clause is to discourage frivolous applications.
      • The refund of Tuition Fee paid will be considered under the following conditions:
      • If a candidate withdraws from the course prior to its commencement, then 75 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course within one week after its commencement, then 60 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course anytime after one week from the date of its commencement, then no refund of tuition fees will be made.
    • Students will also be liable for any travel and accommodation costs incurred for placement. For certain courses, students may incur additional specific charges for such items or activities as sports and games fees, specialized material, or field trips. The Alliance University College of Engineering and Design reserves the right to make additional charges to students for such activities.
    • The Alliance University College of Engineering and Design may withdraw or amend its offer of admission, or terminate the registration, if it is found that either a false or a misleading statement has been made or that significant information has either been omitted or withheld in a candidate's application form.
    • The Alliance University College of Engineering and Design does not accept responsibility and expressly excludes all liability that may result from any loss, damage, or injury caused to a student or to his/her property.
    • Students enrolled in the courses offered by the Alliance University College of Engineering and Design are required to sign an undertaking at the time of the commencement of the academic year consenting to abide by the rules, regulations and the code of conduct of Alliance University.
    • Disputes of any kind are subject to the jurisdiction of the Courts in Bangalore only.

    Office Hours

    Monday to Friday: 9:00 AM to 5:00 PM
    Saturday: 9:00 AM to 1:30 PM

    View Details Duration: 2 Years    Learning Mode: Full Time    Course Level: PG Diploma / Certification

    Post Graduate Diploma in Software Development (PGDSD)

    Post Graduate Diploma in Computer Aided Engineering (PGDCAE)

    PGDCAE

    Admission to the Post Graduate Diploma in Computer Aided Engineering course at the Alliance University College of Engineering and Design is strictly based on merit.
    Eligibility
    • Any graduate
    • Secured an aggregate of 50% (General) 45% (SC, ST, CAT-1, IIA, IIB, IIIA and IIIB of Karnataka)
    Course Duration

    1 year Full-Time

    Application Form

    • Candidates are encouraged to download application forms

    Prospectus 2012

    Download Prospectus 2012

    Online Application

    Terms and Conditions

    Students are required to abide by the following terms and conditions upon admission to the courses offered by Alliance University College of Engineering and Design:

    • Every effort has been made to ensure the accuracy of the information contained in this Prospectus and it is issued on the express condition that all matters in it are subject to change from time to time without notice. While the Alliance University College of Engineering and Design will make all reasonable endeavors to deliver the courses of study and other educational services as set out in this Prospectus, circumstances may change prompting the Alliance University College of Engineering and Design to reserve the right to vary the content and delivery of courses and programs, to either discontinue or combine courses and programs, or to discontinue educational services.
    • The subject titles, descriptions and contents are subject to change based on the University guidelines.
    • The fee schedule for the courses offered by the Alliance University College of Engineering and Design is posted at www.ced.alliance.edu.in

      Fees payable for the courses offered by the Alliance University College of Engineering and Design are subject to review periodically. Ensuring that fees are paid before the announced due dates is the sole responsibility of the student. Non-payment of the prescribed fees within the due dates will result in the cancellation of the registration to the course or to the subsequent semester/year.

    • Policy regarding refund of course fees:
      • The course fee has two components - Registration Fee and Tuition Fee.
      • The Registration Fee, once paid, will not be refunded by the Alliance University, College of Engineering and Design under any circumstances. The objective of this clause is to discourage frivolous applications.
      • The refund of Tuition Fee paid will be considered under the following conditions:
      • If a candidate withdraws from the course prior to its commencement, then 75 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course within one week after its commencement, then 60 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course anytime after one week from the date of its commencement, then no refund of tuition fees will be made.
    • Students will also be liable for any travel and accommodation costs incurred for placement. For certain courses, students may incur additional specific charges for such items or activities as sports and games fees, specialized material, or field trips. The Alliance University College of Engineering and Design reserves the right to make additional charges to students for such activities.
    • The Alliance University College of Engineering and Design may withdraw or amend its offer of admission, or terminate the registration, if it is found that either a false or a misleading statement has been made or that significant information has either been omitted or withheld in a candidate's application form.
    • The Alliance University College of Engineering and Design does not accept responsibility and expressly excludes all liability that may result from any loss, damage, or injury caused to a student or to his/her property.
    • Students enrolled in the courses offered by the Alliance University College of Engineering and Design are required to sign an undertaking at the time of the commencement of the academic year consenting to abide by the rules, regulations and the code of conduct of Alliance University.
    • Disputes of any kind are subject to the jurisdiction of the Courts in Bangalore only.

    Office Hours

    Monday to Friday: 9:00 AM to 5:00 PM
    Saturday: 9:00 AM to 1:30 PM

    View Details Duration: 1 Year    Learning Mode: Full Time    Course Level: PG Diploma / Certification

    Bachelors Degree Courses

    Bachelor of Technology (BTech Information Technology)

    B. Tech. in Information Technology (IT)

    B.Tech (IT)

    Admission to the Bachelor of Technology (B. Tech) course at the Alliance University College of Engineering and Design is strictly based on merit.

    Eligibility
    • 10+2(PCM)* / Diploma (10+3)**
    • Secured an aggregate of 50% (General) 45% (SC, ST, CAT-1, IIA, IIB, IIIA and IIIB of Karnataka)
    • Secured rank in any of the following engineering entrance examinations: IIT-JEE, AIEEE,
      Karnataka CET, Comed-K, Alliance University Engineering Entrance Test (AUEET); and Other state entrances
    Course Duration

    4 years Full-Time
    Note:

    * Physics and Mathematics (compulsory) and Chemistry / Biology / Bio- Technology as optional subject with English as one Subject of study.

    ** Diploma in appropriate branch in Engineering.

    Application Form

    • Candidates are encouraged to download application forms

    Prospectus 2012

    Download Prospectus 2012

    Online Application

    Terms and Conditions

    Students are required to abide by the following terms and conditions upon admission to the courses offered by Alliance University College of Engineering and Design:

    • Every effort has been made to ensure the accuracy of the information contained in this Prospectus and it is issued on the express condition that all matters in it are subject to change from time to time without notice. While the Alliance University College of Engineering and Design will make all reasonable endeavors to deliver the courses of study and other educational services as set out in this Prospectus, circumstances may change prompting the Alliance University College of Engineering and Design to reserve the right to vary the content and delivery of courses and programs, to either discontinue or combine courses and programs, or to discontinue educational services.
    • The subject titles, descriptions and contents are subject to change based on the University guidelines.
    • The fee schedule for the courses offered by the Alliance University College of Engineering and Design is posted at www.ced.alliance.edu.in

      Fees payable for the courses offered by the Alliance University College of Engineering and Design are subject to review periodically. Ensuring that fees are paid before the announced due dates is the sole responsibility of the student. Non-payment of the prescribed fees within the due dates will result in the cancellation of the registration to the course or to the subsequent semester/year.

    • Policy regarding refund of course fees:
      • The course fee has two components - Registration Fee and Tuition Fee.
      • The Registration Fee, once paid, will not be refunded by the Alliance University, College of Engineering and Design under any circumstances. The objective of this clause is to discourage frivolous applications.
      • The refund of Tuition Fee paid will be considered under the following conditions:
      • If a candidate withdraws from the course prior to its commencement, then 75 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course within one week after its commencement, then 60 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course anytime after one week from the date of its commencement, then no refund of tuition fees will be made.
    • Students will also be liable for any travel and accommodation costs incurred for placement. For certain courses, students may incur additional specific charges for such items or activities as sports and games fees, specialized material, or field trips. The Alliance University College of Engineering and Design reserves the right to make additional charges to students for such activities.
    • The Alliance University College of Engineering and Design may withdraw or amend its offer of admission, or terminate the registration, if it is found that either a false or a misleading statement has been made or that significant information has either been omitted or withheld in a candidate's application form.
    • The Alliance University College of Engineering and Design does not accept responsibility and expressly excludes all liability that may result from any loss, damage, or injury caused to a student or to his/her property.
    • Students enrolled in the courses offered by the Alliance University College of Engineering and Design are required to sign an undertaking at the time of the commencement of the academic year consenting to abide by the rules, regulations and the code of conduct of Alliance University.
    • Disputes of any kind are subject to the jurisdiction of the Courts in Bangalore only.

    Office Hours

    Monday to Friday: 9:00 AM to 5:00 PM
    Saturday: 9:00 AM to 1:30 PM

    View Details Duration: 4 Years    Learning Mode: Full Time    Course Level: Bachelors Degree

    Bachelor of Technology (BTech Computer Science Engineering)

    B. Tech. in Computer Science and Engineering (CSE)

    B.Tech (CSE)

    Admission to the Bachelor of Technology (B. Tech) course at the Alliance University College of Engineering and Design is strictly based on merit.

    Eligibility
    • 10+2(PCM)* / Diploma (10+3)**
    • Secured an aggregate of 50% (General) 45% (SC, ST, CAT-1, IIA, IIB, IIIA and IIIB of Karnataka)
    • Secured rank in any of the following engineering entrance examinations: IIT-JEE, AIEEE,
      Karnataka CET, Comed-K, Alliance University Engineering Entrance Test (AUEET); and Other state entrances
    Course Duration

    4 years Full-Time
    Note:

    * Physics and Mathematics (compulsory) and Chemistry / Biology / Bio- Technology as optional subject with English as one Subject of study.

    ** Diploma in appropriate branch in Engineering.

    Application Form

    • Candidates are encouraged to download application forms

    Prospectus 2012

    Download Prospectus 2012

    Online Application

    Terms and Conditions

    Students are required to abide by the following terms and conditions upon admission to the courses offered by Alliance University College of Engineering and Design:

    • Every effort has been made to ensure the accuracy of the information contained in this Prospectus and it is issued on the express condition that all matters in it are subject to change from time to time without notice. While the Alliance University College of Engineering and Design will make all reasonable endeavors to deliver the courses of study and other educational services as set out in this Prospectus, circumstances may change prompting the Alliance University College of Engineering and Design to reserve the right to vary the content and delivery of courses and programs, to either discontinue or combine courses and programs, or to discontinue educational services.
    • The subject titles, descriptions and contents are subject to change based on the University guidelines.
    • The fee schedule for the courses offered by the Alliance University College of Engineering and Design is posted at www.ced.alliance.edu.in

      Fees payable for the courses offered by the Alliance University College of Engineering and Design are subject to review periodically. Ensuring that fees are paid before the announced due dates is the sole responsibility of the student. Non-payment of the prescribed fees within the due dates will result in the cancellation of the registration to the course or to the subsequent semester/year.

    • Policy regarding refund of course fees:
      • The course fee has two components - Registration Fee and Tuition Fee.
      • The Registration Fee, once paid, will not be refunded by the Alliance University, College of Engineering and Design under any circumstances. The objective of this clause is to discourage frivolous applications.
      • The refund of Tuition Fee paid will be considered under the following conditions:
      • If a candidate withdraws from the course prior to its commencement, then 75 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course within one week after its commencement, then 60 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course anytime after one week from the date of its commencement, then no refund of tuition fees will be made.
    • Students will also be liable for any travel and accommodation costs incurred for placement. For certain courses, students may incur additional specific charges for such items or activities as sports and games fees, specialized material, or field trips. The Alliance University College of Engineering and Design reserves the right to make additional charges to students for such activities.
    • The Alliance University College of Engineering and Design may withdraw or amend its offer of admission, or terminate the registration, if it is found that either a false or a misleading statement has been made or that significant information has either been omitted or withheld in a candidate's application form.
    • The Alliance University College of Engineering and Design does not accept responsibility and expressly excludes all liability that may result from any loss, damage, or injury caused to a student or to his/her property.
    • Students enrolled in the courses offered by the Alliance University College of Engineering and Design are required to sign an undertaking at the time of the commencement of the academic year consenting to abide by the rules, regulations and the code of conduct of Alliance University.
    • Disputes of any kind are subject to the jurisdiction of the Courts in Bangalore only.

    Office Hours

    Monday to Friday: 9:00 AM to 5:00 PM
    Saturday: 9:00 AM to 1:30 PM

    View Details Duration: 4 Years    Learning Mode: Full Time    Course Level: Bachelors Degree

    Bachelor of Technology (BTech Aerospace Engineering)

    B.Tech (AE)

    Admission to the Bachelor of Technology (B. Tech) course at the Alliance University , College of Engineering and Design is strictly based on merit.

    Eligibility
    • 10+2(PCM)* / Diploma (10+3)**
    • Secured an aggregate of 50% (General) 45% (SC, St, CAT-1, IIA, IIB, IIIA and IIIB of Karnataka)
    • Secured rank in any of the following engineering entrance examination: IIT-JEE, AIEEE,
      Karnataka CET, Comed-K, Alliance University Engineering Entrance Test (AUEET); and Other state entrances
    Course Duration

    4 years
    Note:

    * Physics and Mathematics (compulsory) and Chemistry / Biology / Bio- Technology as optional subject with English as one Subject of study.

    ** Diploma in appropriate branch in Engineering

    Application Form

    • Candidates are encouraged to download application forms

    Prospectus 2012

    Download Prospectus 2012

    Online Application

    Terms and Conditions

    Students are required to abide by the following terms and conditions upon admission to the courses offered by Alliance University College of Engineering and Design:

    • Every effort has been made to ensure the accuracy of the information contained in this Prospectus and it is issued on the express condition that all matters in it are subject to change from time to time without notice. While the Alliance University College of Engineering and Design will make all reasonable endeavors to deliver the courses of study and other educational services as set out in this Prospectus, circumstances may change prompting the Alliance University College of Engineering and Design to reserve the right to vary the content and delivery of courses and programs, to either discontinue or combine courses and programs, or to discontinue educational services.
    • The subject titles, descriptions and contents are subject to change based on the University guidelines.
    • The fee schedule for the courses offered by the Alliance University College of Engineering and Design is posted at www.ced.alliance.edu.in

      Fees payable for the courses offered by the Alliance University College of Engineering and Design are subject to review periodically. Ensuring that fees are paid before the announced due dates is the sole responsibility of the student. Non-payment of the prescribed fees within the due dates will result in the cancellation of the registration to the course or to the subsequent semester/year.

    • Policy regarding refund of course fees:
      • The course fee has two components - Registration Fee and Tuition Fee.
      • The Registration Fee, once paid, will not be refunded by the Alliance University, College of Engineering and Design under any circumstances. The objective of this clause is to discourage frivolous applications.
      • The refund of Tuition Fee paid will be considered under the following conditions:
      • If a candidate withdraws from the course prior to its commencement, then 75 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course within one week after its commencement, then 60 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course anytime after one week from the date of its commencement, then no refund of tuition fees will be made.
    • Students will also be liable for any travel and accommodation costs incurred for placement. For certain courses, students may incur additional specific charges for such items or activities as sports and games fees, specialized material, or field trips. The Alliance University College of Engineering and Design reserves the right to make additional charges to students for such activities.
    • The Alliance University College of Engineering and Design may withdraw or amend its offer of admission, or terminate the registration, if it is found that either a false or a misleading statement has been made or that significant information has either been omitted or withheld in a candidate's application form.
    • The Alliance University College of Engineering and Design does not accept responsibility and expressly excludes all liability that may result from any loss, damage, or injury caused to a student or to his/her property.
    • Students enrolled in the courses offered by the Alliance University College of Engineering and Design are required to sign an undertaking at the time of the commencement of the academic year consenting to abide by the rules, regulations and the code of conduct of Alliance University.
    • Disputes of any kind are subject to the jurisdiction of the Courts in Bangalore only.

    Office Hours

    Monday to Friday: 9:00 AM to 5:00 PM
    Saturday: 9:00 AM to 1:30 PM

    View Details Duration: 4 Years    Learning Mode: Full Time    Course Level: Bachelors Degree

    Bachelor of Technology (BTech Electronics & Communication Engineering)

    B. Tech. in Electronics and Communication Engineering (ECE)

    B.Tech (ECE)

    Admission to the Bachelor of Technology (B. Tech) course at the Alliance University College of Engineering and Design is strictly based on merit.

    Eligibility
    • 10+2(PCM)* / Diploma (10+3)**
    • Secured an aggregate of 50% (General) 45% (SC, ST, CAT-1, IIA, IIB, IIIA and IIIB of Karnataka)
    • Secured rank in any of the following engineering entrance examinations: IIT-JEE, AIEEE,
      Karnataka CET, Comed-K, Alliance University Engineering Entrance Test (AUEET); and Other state entrances
    Course Duration

    4 years Full-Time
    Note:

    * Physics and Mathematics (compulsory) and Chemistry / Biology / Bio- Technology as optional subject with English as one Subject of study.

    ** Diploma in appropriate branch in Engineering.

    Application Form

    • Candidates are encouraged to download application forms

    Prospectus 2012

    Download Prospectus 2012

    Online Application

    Terms and Conditions

    Students are required to abide by the following terms and conditions upon admission to the courses offered by Alliance University College of Engineering and Design:

    • Every effort has been made to ensure the accuracy of the information contained in this Prospectus and it is issued on the express condition that all matters in it are subject to change from time to time without notice. While the Alliance University College of Engineering and Design will make all reasonable endeavors to deliver the courses of study and other educational services as set out in this Prospectus, circumstances may change prompting the Alliance University College of Engineering and Design to reserve the right to vary the content and delivery of courses and programs, to either discontinue or combine courses and programs, or to discontinue educational services.
    • The subject titles, descriptions and contents are subject to change based on the University guidelines.
    • The fee schedule for the courses offered by the Alliance University College of Engineering and Design is posted at www.ced.alliance.edu.in

      Fees payable for the courses offered by the Alliance University College of Engineering and Design are subject to review periodically. Ensuring that fees are paid before the announced due dates is the sole responsibility of the student. Non-payment of the prescribed fees within the due dates will result in the cancellation of the registration to the course or to the subsequent semester/year.

    • Policy regarding refund of course fees:
      • The course fee has two components - Registration Fee and Tuition Fee.
      • The Registration Fee, once paid, will not be refunded by the Alliance University, College of Engineering and Design under any circumstances. The objective of this clause is to discourage frivolous applications.
      • The refund of Tuition Fee paid will be considered under the following conditions:
      • If a candidate withdraws from the course prior to its commencement, then 75 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course within one week after its commencement, then 60 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course anytime after one week from the date of its commencement, then no refund of tuition fees will be made.
    • Students will also be liable for any travel and accommodation costs incurred for placement. For certain courses, students may incur additional specific charges for such items or activities as sports and games fees, specialized material, or field trips. The Alliance University College of Engineering and Design reserves the right to make additional charges to students for such activities.
    • The Alliance University College of Engineering and Design may withdraw or amend its offer of admission, or terminate the registration, if it is found that either a false or a misleading statement has been made or that significant information has either been omitted or withheld in a candidate's application form.
    • The Alliance University College of Engineering and Design does not accept responsibility and expressly excludes all liability that may result from any loss, damage, or injury caused to a student or to his/her property.
    • Students enrolled in the courses offered by the Alliance University College of Engineering and Design are required to sign an undertaking at the time of the commencement of the academic year consenting to abide by the rules, regulations and the code of conduct of Alliance University.
    • Disputes of any kind are subject to the jurisdiction of the Courts in Bangalore only.

    Office Hours

    Monday to Friday: 9:00 AM to 5:00 PM
    Saturday: 9:00 AM to 1:30 PM

    View Details Duration: 4 Years    Learning Mode: Full Time    Course Level: Bachelors Degree

    Bachelor of Technology (BTech Electrical and Electronics Engineering)

    B. Tech. in Electrical and Electronics Engineering (EEE)

    B.Tech (EEE)

    Admission to the Bachelor of Technology (B. Tech) course at the Alliance University College of Engineering and Design is strictly based on merit.

    Eligibility
    • 10+2(PCM)* / Diploma (10+3)**
    • Secured an aggregate of 50% (General) 45% (SC, ST, CAT-1, IIA, IIB, IIIA and IIIB of Karnataka)
    • Secured rank in any of the following engineering entrance examinations: IIT-JEE, AIEEE,
      Karnataka CET, Comed-K, Alliance University Engineering Entrance Test (AUEET); and Other state entrances
    Course Duration

    4 years Full-Time
    Note:

    * Physics and Mathematics (compulsory) and Chemistry / Biology / Bio- Technology as optional subject with English as one Subject of study.

    ** Diploma in appropriate branch in Engineering.

    Application Form

    • Candidates are encouraged to download application forms

    Prospectus 2012

    Download Prospectus 2012

    Online Application

    Terms and Conditions

    Students are required to abide by the following terms and conditions upon admission to the courses offered by Alliance University College of Engineering and Design:

    • Every effort has been made to ensure the accuracy of the information contained in this Prospectus and it is issued on the express condition that all matters in it are subject to change from time to time without notice. While the Alliance University College of Engineering and Design will make all reasonable endeavors to deliver the courses of study and other educational services as set out in this Prospectus, circumstances may change prompting the Alliance University College of Engineering and Design to reserve the right to vary the content and delivery of courses and programs, to either discontinue or combine courses and programs, or to discontinue educational services.
    • The subject titles, descriptions and contents are subject to change based on the University guidelines.
    • The fee schedule for the courses offered by the Alliance University College of Engineering and Design is posted at www.ced.alliance.edu.in

      Fees payable for the courses offered by the Alliance University College of Engineering and Design are subject to review periodically. Ensuring that fees are paid before the announced due dates is the sole responsibility of the student. Non-payment of the prescribed fees within the due dates will result in the cancellation of the registration to the course or to the subsequent semester/year.

    • Policy regarding refund of course fees:
      • The course fee has two components - Registration Fee and Tuition Fee.
      • The Registration Fee, once paid, will not be refunded by the Alliance University, College of Engineering and Design under any circumstances. The objective of this clause is to discourage frivolous applications.
      • The refund of Tuition Fee paid will be considered under the following conditions:
      • If a candidate withdraws from the course prior to its commencement, then 75 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course within one week after its commencement, then 60 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course anytime after one week from the date of its commencement, then no refund of tuition fees will be made.
    • Students will also be liable for any travel and accommodation costs incurred for placement. For certain courses, students may incur additional specific charges for such items or activities as sports and games fees, specialized material, or field trips. The Alliance University College of Engineering and Design reserves the right to make additional charges to students for such activities.
    • The Alliance University College of Engineering and Design may withdraw or amend its offer of admission, or terminate the registration, if it is found that either a false or a misleading statement has been made or that significant information has either been omitted or withheld in a candidate's application form.
    • The Alliance University College of Engineering and Design does not accept responsibility and expressly excludes all liability that may result from any loss, damage, or injury caused to a student or to his/her property.
    • Students enrolled in the courses offered by the Alliance University College of Engineering and Design are required to sign an undertaking at the time of the commencement of the academic year consenting to abide by the rules, regulations and the code of conduct of Alliance University.
    • Disputes of any kind are subject to the jurisdiction of the Courts in Bangalore only.

    Office Hours

    Monday to Friday: 9:00 AM to 5:00 PM
    Saturday: 9:00 AM to 1:30 PM

    View Details Duration: 4 Years    Learning Mode: Full Time    Course Level: Bachelors Degree

    Bachelor of Technology (BTech Mechanical Engineering)

    Admission to the Bachelor of Technology (B. Tech) course at the Alliance University College of Engineering and Design is strictly based on merit.

    Eligibility
    • 10+2(PCM)* / Diploma (10+3)**
    • Secured an aggregate of 50% (General) 45% (SC, ST, CAT-1, IIA, IIB, IIIA and IIIB of Karnataka)
    • Secured rank in any of the following engineering entrance examinations: IIT-JEE, AIEEE,
      Karnataka CET, Comed-K, Alliance University Engineering Entrance Test (AUEET); and Other state entrances
    Course Duration

    4 years Full-Time
    Note:

    * Physics and Mathematics (compulsory) and Chemistry / Biology / Bio- Technology as optional subject with English as one Subject of study.

    ** Diploma in appropriate branch in Engineering.

    Application Form

    • Candidates are encouraged to download application forms

    Prospectus 2012

    Download Prospectus 2012

    Apply Online
    http://oamslive.blueshiftindia.com/AUCED/website/

    Fees

    Students are required to abide by the following terms and conditions upon admission to the courses offered by Alliance University College of Engineering and Design:

    Every effort has been made to ensure the accuracy of the information contained in this Prospectus and it is issued on the express condition that all matters in it are subject to change from time to time without notice. While the Alliance University College of Engineering and Design will make all reasonable endeavors to deliver the courses of study and other educational services as set out in this Prospectus, circumstances may change prompting the Alliance University College of Engineering and Design to reserve the right to vary the content and delivery of courses and programs, to either discontinue or combine courses and programs, or to discontinue educational services.

    The subject titles, descriptions and contents are subject to change based on the University guidelines.

    The fee schedule for the courses offered by the Alliance University College of Engineering and Design is posted at www.ced.alliance.edu.in

    Fees payable for the courses offered by the Alliance University College of Engineering and Design are subject to review periodically. Ensuring that fees are paid before the announced due dates is the sole responsibility of the student. Non-payment of the prescribed fees within the due dates will result in the cancellation of the registration to the course or to the subsequent semester/year.

    Policy regarding refund of course fees:

    The course fee has two components - Registration Fee and Tuition Fee.

    The Registration Fee, once paid, will not be refunded by the Alliance University, College of Engineering and Design under any circumstances. The objective of this clause is to discourage frivolous applications.

    The refund of Tuition Fee paid will be considered under the following conditions:

    If a candidate withdraws from the course prior to its commencement, then 75 percent of the tuition fees will be refunded.

    If a candidate withdraws from the course within one week after its commencement, then 60 percent of the tuition fees will be refunded.

    If a candidate withdraws from the course anytime after one week from the date of its commencement, then no refund of tuition fees will be made.

    Students will also be liable for any travel and accommodation costs incurred for placement. For certain courses, students may incur additional specific charges for such items or activities as sports and games fees, specialized material, or field trips. The Alliance University College of Engineering and Design reserves the right to make additional charges to students for such activities.

    The Alliance University College of Engineering and Design may withdraw or amend its offer of admission, or terminate the registration, if it is found that either a false or a misleading statement has been made or that significant information has either been omitted or withheld in a candidate's application form.

    The Alliance University College of Engineering and Design does not accept responsibility and expressly excludes all liability that may result from any loss, damage, or injury caused to a student or to his/her property.

    Students enrolled in the courses offered by the Alliance University College of Engineering and Design are required to sign an undertaking at the time of the commencement of the academic year consenting to abide by the rules, regulations and the code of conduct of Alliance University.

    Disputes of any kind are subject to the jurisdiction of the Courts in Bangalore only.

    Office Time :
    Monday to Friday: 9:00 AM to 5:00 PM
    Saturday: 9:00 AM to 1:30 PM

    View Details Duration: 4 Years    Learning Mode: Full Time    Course Level: Bachelors Degree

    Bachelor of Technology (BTech Civil Engineering)

    Admission to the Bachelor of Technology (B. Tech) course at the Alliance University College of Engineering and Design is strictly based on merit.

    Eligibility
    10+2(PCM)* / Diploma (10+3)**
    Secured an aggregate of 50% (General) 45% (SC, ST, CAT-1, IIA, IIB, IIIA and IIIB of Karnataka)
    Secured rank in any of the following engineering entrance examinations: IIT-JEE, AIEEE, Karnataka CET, Comed-K, Alliance University Engineering Entrance Test (AUEET); and Other state entrances

    Course Duration - 4 years Full-Time

    Note:
    * Physics and Mathematics (compulsory) and Chemistry / Biology / Bio- Technology as optional subject with English as one Subject of study.

    ** Diploma in appropriate branch in Engineering.

    Candidates are encouraged to download application forms
    http://ced.alliance.edu.in/attachments/Application-form-CED.pdf

    Prospectus 2012
    http://ced.alliance.edu.in/attachments/CED-Prospectus-2012.pdf

    Apply Online
    http://oamslive.blueshiftindia.com/AUCED/website/

    Download Fee Schedule : 2012
    http://ced.alliance.edu.in/attachments/Fee-Structure.pdf

    Download Hostel Fee Schedule : 2012
    http://ced.alliance.edu.in/attachments/Hostel%20Fee.pdf

    Terms and Conditions

    Students are required to abide by the following terms and conditions upon admission to the courses offered by Alliance University College of Engineering and Design:

    • Every effort has been made to ensure the accuracy of the information contained in this Prospectus and it is issued on the express condition that all matters in it are subject to change from time to time without notice. While the Alliance University College of Engineering and Design will make all reasonable endeavors to deliver the courses of study and other educational services as set out in this Prospectus, circumstances may change prompting the Alliance University College of Engineering and Design to reserve the right to vary the content and delivery of courses and programs, to either discontinue or combine courses and programs, or to discontinue educational services.
    • The subject titles, descriptions and contents are subject to change based on the University guidelines.
    • The fee schedule for the courses offered by the Alliance University College of Engineering and Design is posted at www.ced.alliance.edu.in

      Fees payable for the courses offered by the Alliance University College of Engineering and Design are subject to review periodically. Ensuring that fees are paid before the announced due dates is the sole responsibility of the student. Non-payment of the prescribed fees within the due dates will result in the cancellation of the registration to the course or to the subsequent semester/year.

    • Policy regarding refund of course fees:
      • The course fee has two components - Registration Fee and Tuition Fee.
      • The Registration Fee, once paid, will not be refunded by the Alliance University, College of Engineering and Design under any circumstances. The objective of this clause is to discourage frivolous applications.
      • The refund of Tuition Fee paid will be considered under the following conditions:
      • If a candidate withdraws from the course prior to its commencement, then 75 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course within one week after its commencement, then 60 percent of the tuition fees will be refunded.
      • If a candidate withdraws from the course anytime after one week from the date of its commencement, then no refund of tuition fees will be made.
    • Students will also be liable for any travel and accommodation costs incurred for placement. For certain courses, students may incur additional specific charges for such items or activities as sports and games fees, specialized material, or field trips. The Alliance University College of Engineering and Design reserves the right to make additional charges to students for such activities.
    • The Alliance University College of Engineering and Design may withdraw or amend its offer of admission, or terminate the registration, if it is found that either a false or a misleading statement has been made or that significant information has either been omitted or withheld in a candidate's application form.
    • The Alliance University College of Engineering and Design does not accept responsibility and expressly excludes all liability that may result from any loss, damage, or injury caused to a student or to his/her property.
    • Students enrolled in the courses offered by the Alliance University College of Engineering and Design are required to sign an undertaking at the time of the commencement of the academic year consenting to abide by the rules, regulations and the code of conduct of Alliance University.
    • Disputes of any kind are subject to the jurisdiction of the Courts in Bangalore only.

    Students are required to abide by the following terms and conditions upon admission to the courses offered by Alliance University College of Engineering and Design:

    Every effort has been made to ensure the accuracy of the information contained in this Prospectus and it is issued on the express condition that all matters in it are subject to change from time to time without notice. While the Alliance University College of Engineering and Design will make all reasonable endeavors to deliver the courses of study and other educational services as set out in this Prospectus, circumstances may change prompting the Alliance University College of Engineering and Design to reserve the right to vary the content and delivery of courses and programs, to either discontinue or combine courses and programs, or to discontinue educational services.

    The subject titles, descriptions and contents are subject to change based on the University guidelines.

    The fee schedule for the courses offered by the Alliance University College of Engineering and Design is posted at www.ced.alliance.edu.in

    Fees payable for the courses offered by the Alliance University College of Engineering and Design are subject to review periodically. Ensuring that fees are paid before the announced due dates is the sole responsibility of the student. Non-payment of the prescribed fees within the due dates will result in the cancellation of the registration to the course or to the subsequent semester/year.

    Policy regarding refund of course fees:

    The course fee has two components - Registration Fee and Tuition Fee.

    The Registration Fee, once paid, will not be refunded by the Alliance University, College of Engineering and Design under any circumstances. The objective of this clause is to discourage frivolous applications.

    The refund of Tuition Fee paid will be considered under the following conditions:

    If a candidate withdraws from the course prior to its commencement, then 75 percent of the tuition fees will be refunded.

    If a candidate withdraws from the course within one week after its commencement, then 60 percent of the tuition fees will be refunded.

    If a candidate withdraws from the course anytime after one week from the date of its commencement, then no refund of tuition fees will be made.

    Students will also be liable for any travel and accommodation costs incurred for placement. For certain courses, students may incur additional specific charges for such items or activities as sports and games fees, specialized material, or field trips. The Alliance University College of Engineering and Design reserves the right to make additional charges to students for such activities.

    The Alliance University College of Engineering and Design may withdraw or amend its offer of admission, or terminate the registration, if it is found that either a false or a misleading statement has been made or that significant information has either been omitted or withheld in a candidate's application form.

    The Alliance University College of Engineering and Design does not accept responsibility and expressly excludes all liability that may result from any loss, damage, or injury caused to a student or to his/her property.

    Students enrolled in the courses offered by the Alliance University College of Engineering and Design are required to sign an undertaking at the time of the commencement of the academic year consenting to abide by the rules, regulations and the code of conduct of Alliance University.

    Disputes of any kind are subject to the jurisdiction of the Courts in Bangalore only.

    Monday to Friday: 9:00 AM to 5:00 PM

    Saturday: 9:00 AM to 1:30 PM

    View Details Duration: 4 Years    Learning Mode: Full Time    Course Level: Bachelors Degree
     
    Publish Your Event Add an event or your college festivals to IndCareer.com. It's quick and free!
     

    Alliance College Of Engineering And Design, Bangalore is affiliated to Alliance University, Bangalore.

    Click here to browse Alliance University, Bangalore Examination Results

     

    Alliance College Of Engineering And Design, Bangalore is affiliated to Alliance University, Bangalore. Browse Alliance University, Bangalore Time Tables

     

    List of facilities available at Alliance College Of Engineering And Design, Bangalore for students.

    • wifi
    • Library
    • Sports
    • Transportation
    • Hostels
    • Healthcare
    • Internet
    • Cafeteria
    • Computer Labs
     
     
       
      Alumni
      Generations of past students, both male and female, are proud to be known and enjoy maintaining their connection with the college and each other. Please write to [email protected] with link of existing almuni group, or request for creation of group.